Follow

How Do I Log In To The Local Management Web GUI?

The following steps will walk you through connecting to the ScreenBeam Enterprise 950 with default settings.

You will need to connect to the hidden SSID of the Enterprise 950

1.Note the SSID shown on the “Ready to Connect” screen as shown.

 

2.Right-click the Wi-Fi network icon on the taskbar and select Open Network and Sharing Center as shown.

3.When the Network and Sharing Center window appears. Click Set up a new connection or network as shown.

4.When the Set Up a Connection or Network window appears. Choose the Manually connect to a wireless network option.

5.When the Manually connect to a wireless network window appears. Type in or select the following information.

Network name: The SSID of the ScreenBeam 950 receiver you wish to connect to.

Security type: WPA2 Personal

Encryption type: AES

Security key: 12345678 (default)

6.Check Connect even if the network is not broadcasting. Click Next.

7.You have added the receiver’s SSID successfully. Click Close.

8.Your device will connect to the SSID automatically if you have selected “Start this connection automatically”. Otherwise, go to the Networks page and connect to the SSID.

9.A URL (it is “http://192.168.51.1” in this example) is displayed on the connected display.

Note: This link will be displayed in full screen for a few seconds, and then it is displayed in the lower left corner.

10.Access the URL address ("http://192.168.51.1" in this example) with a web browser on the laptop.

11.The web server login interface appears. Type the username and password in the Username and Password boxes and click the Login button.

Note:

By default, the Username is “Administrator” and Password is “Actiontec”.

The username and password are case sensitive.

Print Friendly and PDF
Have more questions? Submit a request

Comments